|
|
 Juniper Networks M-series Multi-service Edge Routing Portfolio
Specifications
| Physical |
| Description |
M7i |
M10i |
M20 |
M40e |
M320 |
Dimensions (H x W x D) |
3.5 x 17.5 x 18 in 8.9 x 44.5 x 45.7 cm |
8.75 x 17.5 x 18 in 22.2 x 44.5 x 45.7 cm |
14 x 17.4 x 21 in 35.6 x 44.3 x 53.3 cm |
35 x 17.4 x 26 in 88.9 x 44.3 x 73.7 cm |
34.8 x 17.4 x 25.7 in 88.4 x 44.3 x 65.1 cm |
| Maximum Weight |
38.2 lbs / 17.3 Kg |
79 lbs / 36 Kg |
150 lbs / 68 kg |
370.5 lbs / 168 kg |
439 / 199.6 kg |
| Mounting |
Front or center |
Front or center |
Front or center |
Front or center |
Front or
center | | |
| DC System Input Power (Fully Loaded) |
| |
10 A at –48 VDC 378 watts |
12 A at –48 VDC 576 watts |
24 A at -48 VDC 1,200 watts |
54 A at -48 VDC 2,600 watts |
65 A at -48 VDC 3,150
watts | | |
| DC Input Power Supply (per individual power
supply) |
| Nominal Voltage |
-48, -60 VDC |
-48, -60 VDC |
-48, -60 VDC |
-48, -60 VDC |
-48, -60 VDC |
| Operating Range |
-42 to -72 VDC |
-42 to -72 VDC |
-42 to -72 VDC |
-42 to -72 VDC |
-42 to -72 VDC |
| Power |
378 watts |
576 watts |
1,200 watts |
3,150 watts |
2,000 watts |
| Current Rating |
10 A at –48 VDC |
12 A at –48 VDC |
24 A at -48 VDC |
65 A at -48 VDC* |
42A at -48 VDC |
| # of power supplies required (non-redundant/
redundant) |
1/2 |
2/4 |
1/2 |
1/2 |
2/4 | | |
| AC System Input Power (Fully Loaded) |
| |
4 to 2 A 00 to 240 VAC 47 to 63
Hz 400 watts |
8 to 4 A 100 to 240 VAC 47 to 63
Hz 800 watts |
12 to 6 A 200 to 240 VAC 47 to 63
Hz 1,950 watts |
15 to 13 A 200 to 240 VAC 47 to 63
Hz 3,000 watts |
17 A to 14 A 200 to 240 VAC47-63
Hz 3,500watts | | |
| AC Input Power Supply (per individual power
supply) |
| |
100, 120, 200, 208, 220, 240 VAC |
100, 120, 200, 208, 220, 240 VAC |
100, 120, 200, 208, 220, 240 VAC |
200, 208, 220, 240 VAC |
200,208,220, 240 VAC |
| Operating Range |
90 to 264 VAC |
90 to 264 VAC |
90 to 264 VAC |
180 to 264 VAC |
180 to 264 VAC |
| Power |
400 watts |
800 watts |
1,200 watts |
3,000 watts |
1,750 watts |
| Current Rating |
4 to 2 A 100 to 240 VAC |
8 to 4 A 100 to 240 VAC |
12 to 6 A 100 to 240 VAC |
16 A 200 to 240 VAC |
10 to 8.5 A200 to 240 VAC |
| # of power supplies required (non-redundant/
redundant) |
1/2 |
2/3 |
1/2 |
1/2 |
3/4 | | |
| |
|
* The M40e router does not require circuit breakers
greater than 60 A, and does not draw greater input
current than 54 A. * The depth of all chassis are
measured from the front flange to the rear of the
product. Please add 4-6" for cables and airflow
clearance. | | |
| Forwarding and Switch Interface Boards |
|
M7i, M10i CFEB
|
| M20 SSB |
| M40e SFM |
| M320 SIB | | |
| FPC |
M20
 | 3.2-Gbps full-duplex throughput per FPC |
 | Enhanced I/O Manager ASIC
 | Parsing, prioritizing, and queuing of packets |
 | 2-MB parity-protected SSRAM per I/O Manager ASIC
|
|
 | 200 ms of delay-bandwidth buffering per FPC |
|
M40e
 | 3.2-Gbps full-duplex throughput per M40e-FPC,
M40e-FPC1, and M40e-FPC2 |
 | Two Packet Director ASICs for dispersing and
balancing packets across the enhanced I/O Manager
ASICs |
 | Two enhanced I/O Manager ASICs
 | Parsing, prioritizing, and queuing of packets |
 | 2-MB parity-protected SSRAM per I/O Manager ASIC
|
|
 | 200 ms of delay-bandwidth buffering per FPC |
|
M320
 | 4-Gbps full-duplex throughput per M320-FPC1 |
 | 16-Gbps full-duplex throughput per M320-FPC2 |
 | 20-Gbps full-duplex throughput per M320-FPC3 |
 | Layer 2 / Layer 3 Packet Processing ASICs |
 | Switch Interface ASICs |
 | Internet Processor ASICs |
 | Memory subsystem, including Queuing and Memory
Interface ASICs |
 | Processor subsystem |
| | |
| Routing Engine |
400 MHz (M7i, M10i)
 | 400-MHz Celeron processor with default 256-KB
Level 2 cache |
 | 256-MB SDRAM DIMMs, upgradeable to 512-MB or
768-MB SDRAM in 256-MB increments |
 | 20-GB IDE hard drive for secondary storage |
 | Fast Ethernet RJ-45 port for out-of-band
management |
 | Two RS-232 (DB-9 connector) asynchronous serial
ports for console and remote management |
 | Backup boot media
 | Optional PCMCIA card adapter and 256-MB compact
flash card |
|
|
600 MHz (M20, M40e)
 | 600-MHz Intel Pentium III |
 | Memory
 | M20, M40e: 2-GB ECC DRAM |
|
 | 256-MB flash drive for primary storage |
 | 30-GB IDE hard drive for secondary storage |
 | Tertiary storage
 | M20, M40e: 128-MB flash PC card |
|
|
1.6 GHz (M320)
 | 1.6-GHz Pentium IV processor with integrated
256-KB Level 2 cache |
 | 2-GB DRAM |
 | 256-MB Compact flash drive for primary storage |
 | 30-GB IDE hard drive for secondary storage |
 | 10/100 Base-T autosensing RJ-45 Ethernet port for
out-of-band management |
 | Two RS-232 (DB9 connector) asynchronous serial
ports for console and remote management |
 | Optional redundancy |
| | |
| Control Systems |
M40e
Miscellaneous Control Subsystem
 | 19.44-MHz stratum 3 reference clock for PICs
 | Controller to monitor the status of router
components | | |
| M320 | | |
| Agency Approvals |
|
| Environment |
Temperature
 | 32 to 104 degrees F / 0 to 40 degrees C |
|
Maximum Altitude
 | No performance degradation to 10,000 ft / 3,048 m
|
|
Relative Humidity
 | 5 to 90 percent noncondensing |
|
Seismic / Earthquake
 | Designed to meet Telecordia Technologies Zone 4
earthquake requirements |
| | | |
|
|

CNP IS A SUBSIDIARY OF
WEB SERVICES GLOBAL LLC
PO BOX 341131 Bethesda, MD 20827
|
|
|